But the guides Quadro still considered our furniture-makers as too expensive. Therefore, the most popular are the more simple and cheap - double row. In two series - albeit cheaper, but does not mean worse. These slides can be installed inside the groove formed in the sidewall of the shell drawer, or have bead unseating with pins, to which his specially drilled holes in the hull during the installation is put on the top drawer.

Using for transfer ball bearing drawer slides sending a number of advantages to the comfort and convenience: they operate almost noiselessly, have nonseparable connection with the case box. Ball bearing slides can withstand a greater load than the roller. They are durable, although demand for relatively tight tolerances in the manufacture of furniture and enclosures with additives.

By means of advancing different ball bearing slides partial and full extension. Complete nomination means that when you open the drawer slide on its full length (depth), which facilitates free access to all of its content. The total length of ball bearing slide is from 200 to 550 mm, with gradation in 50 mm. Their carrying capacity is dependent not only on the grade of steel used in manufacturing, but also on the thickness of the sheet from which the punching. It varies from 0,8 to 1,2 mm.

3.2 Furniture hinges

Furniture hinges - an important detail in ANY cabinet furniture. Today the furniture from chipboard and fiberboard unacceptable use of obsolete "piano" hinge - small screws, fastening them in wood stoves for a long time is not delayed.

Furniture hinges, in contrast to the door hinges, furniture fittings, as may be made on the basis of various materials. Furniture hinges are made not only of steel and other materials with increased strength, but also of copper, zinc, aluminum. Used such hinges on simple designs furniture products - cabinets, lockers and other supplies furniture sets.